How to Root Galaxy S4 LTE I9505 on Android 4 3 Jelly Bean Firmware

The LTE version of Samsung Galaxy S4 with model number GT-I9500 has officially received the Android 4.3 Jelly Bean update. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 I9505 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505 (CF-Auto-Root-jflte-jfltexx-gti9505.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

How to Update Galaxy S4 LTE I9505 with Android 4 3 XXUEMK9 Jelly Bean Official Firmware

Samsung has just started to push the latest Android 4.3 Jelly Bean update with firmware build number I9505XXUEMK9 for the Qualcomm Snapdragon 800 variant of the Galaxy S4 (LTE) bearing model number GT-I9505 in select Southeast Asian countries - Malaysia, Philippines, and Singapore. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9505XXUEMK9
CSC: I9505OLBEMK3
MODEM: I9505XXUEMK9
Version: Android 4.3
Build date: Nov 21, 2013
Regions: Malaysia, Philippines, Singapore

Samsung Galaxy S4 (LTE) I9505 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUEMK9 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy S4 (GT-I9505). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. Android 4.3 XXUEMK9 Jelly Bean Firmware (Alternative Link) for Galaxy S4 (LTE) I9505
2. Odin 3.07

Steps to Update Galaxy S4 (LTE) I9505 with Android 4.3 XXUEMK9 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S4.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9505XXUEMK9 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (LTE) I9505 should be now updated with official Android 4.3 XXUEMK9 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S4 (LTE) I9505 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

ShowServiceMode For Galaxy LTE apk Update Version

ShowServiceMode For Galaxy LTE apk

Current Version : 3.2.5

Requires Android : 2.3.3 and up

Category : Tools

Size : 301k

Original Post From http://apktoolsdownload.blogspot.com

ShowServiceMode For Galaxy LTE apk Description

The "ShowServiceMode" is an application to be able to call "Secret Screen" quickly which are provided as standard maintenance menu. Has been primarily developed for the Samsung Galaxy.
It does not feel good to change the settings. But you want to change the settings?
Regardless of whether or not you can call successfully on your models, this implements a lot of method of multiple calls which can call.
(ShowServiceMode is specialized for the switching of LTE)

Dial pad does not accept the input of secret code. However, there may be some cases where the function corresponding to the secret code that are present.
In that case, Using ShowServiceMode, you can call the hidden screen. (It has been confirmed by many of Galaxy series)

----- Tested compatible models(2013/05/26) -----
*Tested developer
NTT docomo GALAXY S II LTE SC-03D
NTT docomo GALAXY Note SC-05D

*Tested collaborators
NTT docomo GALAXY Note II SC-02E
NTT docomo GALAXY S III SC-06D
NTT docomo GALAXY Tab 10.1 LTE SC-01D
SK Telecom GALAXY S IV SHV-E300S
SK Telecom GALAXY S III SHV-E210S
Galaxy Beam GT-I8530
Galaxy Camera EK-GC100

*From the user as "work!", was reported.
SC-01E、SC-03E、GT-P6200、GT-N7100、SHV-E160K、SHV-E160S、GT-N7105

*Terminal list of buyers.(Developer is not confirmed)
SC-04E、SC-02B、SC-02C、SC-04D、GT-N7000、GT-P7300、ME370T(AsusNexus7)

*S4 supported for V3.2.5!
You may use the 3011, 3012, 3013, 4013.

You can start in many models. However, depending on the model, you may not use some features.

----- To those who use the Ver3.2.2 and Ver3.2.3 -----
If you can not run with an error, please update to Ver3.2.4.
Has now published a Ver3.2.4, you can use without any problem. (There is no bug report)
To all who happen to experience any problems, I apologize.

----- Understanding False detection security app -----
I have confirmed that in the application below, it is erroneously detected as malware.
avast! Mobile Security

The ShowServiceMode, have not been used also ad delivery service and you do not have Internet access privileges.
Since it does not contain any malicious code, please use it in peace.

----- Notes -----
AT YOUR OWN RISK!
To malfunction or trouble due to the change the setting, the developer does not take any responsibility. Please use this on your own risk. By the settings, all data disappear, or continue to occur is an error as the case may be. Actaully there may be a risk that would prevent the call. Additionally, the screen after the call is not a ShowServiceMode app.
Please use on the understanding, is that users should not change the settings easily. Sorry, support for foreign language is difficult. Developers can understand only Japanese.
In addition, other models and SC-05D SC-03D Please note, because the developer is unable to confirm the operation, because there is a delay in response.

----- Survey of non-compatible models -----
If there is a firmware image file, developers will be able to investigate.

----- Evaluation version -----
There is also a free version for an information provider, is in Japanese only.
http://jakenjarvis.wordpress.com/showservicemode-for-galaxy-lte/
This is provided, like an evaluation version, as free version for information providers. You will be asked to provide information such as Bug reports and behavior which you find out.
If you fall in love with ShowServiceMode, please consider purchasing!

ShowServiceMode For Galaxy LTE apk Videos and Images

Visit us on http://apktoolsdownload.blogspot.com

download

Read More..

How to Update Galaxy S4 LTE I9505 with Android 4 3 XXUEMK8 Jelly Bean Official Firmware

Samsung Galaxy S4 LTE version with Qualcomm Snapdragon 800 processor has received a new Android 4.3 Jelly Bean update with base firmware XXUEMK8. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9505XXUEMK8
CSC: I9505OXAEMK8
MODEM: I9505XXUEMK8
Version: Android 4.3
Build date: Nov 19, 2013
Regions: Germany

Samsung Galaxy S4 (LTE) I9505 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside Germany can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUEMK8 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy S4 (GT-I9505). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. Android 4.3 XXUEMK8 Jelly Bean Firmware (Alternative Link) for Galaxy S4 (LTE) I9505
2. Odin 3.07

Steps to Update Galaxy S4 I9505 with Android 4.3 XXUEMK8 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S4.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9505XXUEMK8 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 I9505 should be now updated with official Android 4.3 XXUEMK8 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S4 I9505 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..